Z150Pro Picosecond Laser Tattoo Removal Machine – 4 Wavelengths, 1500W

Z150Pro Picosecond Laser Tattoo Removal Machine

A 1500W portable picosecond laser with four wavelengths — 532 / 755 / 1064 / 1320 nm — for tattoo and pigmentation removal, carbon laser peel and skin rejuvenation. Up to 2000 mJ per pulse, 10 Hz repetition rate, a 5,000,000-shot laser source and an 11.6-inch 4K touchscreen. Supplied in white or black, 110–120 V or 220–240 V, with OEM language and logo options for clinics, medspas and distributors.

4 Wavelengths · 532–1320 nm1500 W10–2000 mJ10 Hz5M Shots11.6-inch 4K TouchCE · RoHS
Z150Pro white picosecond laser tattoo removal machine, front view with 11.6-inch 4K touchscreen showing 532nm, 755nm, 1064nm and 1320nm

Product Overview

Z150Pro picosecond laser machine in white chassis with laser handpiece resting in its cradle, three-quarter view

Z150Pro is a tabletop picosecond laser built for tattoo removal and pigment correction in professional clinics. It puts four wavelengths — 532 nm, 755 nm, 1064 nm and 1320 nm — into a single console driven by one laser handpiece, so the full ink colour spectrum, including the stubborn blues and greens that defeat two-wavelength systems, can be treated from the same machine. A carbon laser peel (“black doll”) programme and general rejuvenation work sit on the same platform.

The laser source delivers up to 1500 W and 2000 mJ per pulse at a repetition rate of up to 10 Hz, with a stated life of 5,000,000 shots — the figure that decides cost per treatment over the life of the unit. Operation runs from an 11.6-inch 4K ultra HD touchscreen, so wavelength and energy changes between passes take seconds. The chassis is aluminium and comes in white or black, and interface language and machine logo can be customised for OEM and distributor programmes.

Wavelengths
532 / 755 / 1064 / 1320 nm
Laser power
1500 W
Energy
10–2000 mJ
Frequency
Up to 10 Hz
Laser life
5,000,000 shots
Display
11.6-inch 4K touchscreen

Technical Specifications

Parameter Specification
Product type Portable picosecond laser system for tattoo and pigmentation removal
Model (SKU) Z150Pro
Wavelengths 532 nm / 755 nm / 1064 nm / 1320 nm
Laser power 1500 W
Energy output 10–2000 mJ
Repetition rate Up to 10 Hz
Beam delivery Single laser handpiece with interchangeable treatment probes
Treatment probes 5 supplied as standard
Display 11.6-inch 4K ultra HD touchscreen
Laser source life 5,000,000 shots
Functions Tattoo removal, pigmentation removal, carbon laser peel, skin rejuvenation
Chassis colours White / black
Body material Aluminium
Control Electronic control via touchscreen
Input voltage 110–120 V / 220–240 V
Single package size 55 × 53 × 56 cm
Gross weight 27.0 kg per single packed unit
Certification CE, RoHS
Warranty 2 years
OEM / ODM Interface language and logo customisation available
Minimum order 1 set
Lead time Within 15 working days for mass production
Application Beauty salons, aesthetic and dermatology clinics, distributors

Specifications are the values published for the Z150Pro platform (October 2026). Carton size and gross weight are the single-pack figures for this configuration. Confirm your exact configuration and accessory set before ordering.

Documentation & Downloads

Want the full picture before you request a quote? Both documents open or download straight from here — no form needed.

Four Wavelengths, One Console

Ink colour decides which wavelength clears a tattoo, so wavelength count is the single most important number on a picosecond laser. Z150Pro covers all four of the working wavelengths — including 1320 nm for carbon peel and rejuvenation work that a 532/1064 nm machine cannot reach.

Wavelength Target Typical indications
532 nm Oxyhaemoglobin and superficial melanin Red, orange and yellow tattoo ink; freckles and epidermal pigment
755 nm Melanin — high absorption Blue and green ink, the colours most systems fail to clear; sun spots and dermal pigment
1064 nm Melanin — deeper dermal penetration Black and dark blue ink; dermal pigmentation and overall skin toning
1320 nm Water and carbon (no pigment-specific chromophore) Carbon laser peel (“black doll”) and collagen-stimulating rejuvenation, pores and fine lines

Handpiece and treatment probes

One laser handpiece carries the beam through a coiled umbilical to the console. Five treatment probes are supplied as standard — 532 nm, 755 nm focus, 1064 nm, 1064 nm fractional and 1320 nm — held on a quick-release mount so the operator swaps them between passes rather than calling a service engineer. The fractional 1064 nm probe adds a non-ablative resurfacing option on top of the pigment work. Probes are the wear item on this platform, so check the spare probe price at the point of purchase.

Side view of the Z150Pro picosecond laser showing cooling vents, aluminium body and four-wavelength treatment screen

Wavelength-to-indication guidance reflects general picosecond laser practice for the chromophores listed. Final settings and treatment protocols remain the practitioner’s clinical decision.

Key Features

Four Wavelengths, Including 1320 nm

532 / 755 / 1064 / 1320 nm in one cabinet. The 755 nm and 1320 nm bands are what let you clear blue and green ink and run carbon peel from a single device, instead of adding a second machine for the colours a 532/1064 nm laser leaves behind.

1500 W and 2000 mJ per Pulse

Up to 2000 mJ at a repetition rate of up to 10 Hz — enough energy density for dense black work and larger tattoo fields, while keeping session times short because the pulse rate is high.

5,000,000-Shot Laser Source

The stated laser life is five million shots. That number, not the purchase price, determines cost per treatment: it keeps replacement cost out of the picture for years at typical clinic volumes.

11.6-inch 4K Ultra HD Touchscreen

A large, high-resolution working interface. Wavelength, energy and frequency are changed on screen, which matters during multi-colour sessions that need several passes at different settings.

Aluminium Body, Two Finishes

The chassis is aluminium with active cooling vents for continuous daily use, and is supplied in white or black so the machine matches the treatment room, not the other way round.

Built for OEM and Distribution

Interface language and machine logo can both be customised, so distributors and private-label brands can ship Z150Pro under their own identity. CE and RoHS documentation is available for your import file.

Z150Pro laser handpiece handle details: quick-release probe connection and the five treatment probes - 532nm, 755nm focus, 1064nm, 1064nm fractional and 1320nm

Handle details — quick-release probe mount and the five supplied treatment probes: 532 nm, 755 nm focus, 1064 nm, 1064 nm fractional and 1320 nm.

Where Z150Pro Is Used

Z150Pro is a laser platform for clinics whose menu covers tattoo removal, pigment correction and rejuvenation. Because it carries four wavelengths, one machine covers the treatments a two-wavelength Q-switched laser cannot finish — and the carbon peel programme adds a repeatable, low-downtime facial to the same booking sheet.

Multi-Colour Tattoo Removal
Eyebrow & PMU Removal
Freckles & Sun Spots
Dermal Pigmentation
Carbon Laser Peel (“Black Doll”)
Skin Rejuvenation & Tone
Pore Refinement
Acne Scar Texture
Fine Lines & Wrinkles

Application areas describe the intended use of the platform. Treatment suitability, settings and technique remain the practitioner’s clinical decision.

Z150Pro vs Traditional Q-Switched Nanosecond Lasers

Dimension Z150Pro picosecond laser Conventional nanosecond laser
Pulse duration Picosecond (10-12 s) Nanosecond (10-9 s)
Wavelengths 4 — 532 / 755 / 1064 / 1320 nm Usually 2 — 532 / 1064 nm
Laser power 1500 W Typically 500–1000 W
Maximum energy 2000 mJ Lower, model dependent
Repetition rate Up to 10 Hz Commonly 1–5 Hz
Blue and green ink Covered by the 755 nm band Weak or untreated
Sessions to clearance Fewer sessions — suppliers of this platform report 30–50% fewer More sessions required
Control 11.6-inch 4K touchscreen Small LCD panel
Laser life 5,000,000 shots stated Often unstated
Chassis options White / black Single colour

Ink colour, not machine class, decides whether a tattoo can be cleared. If you are matching a platform to a patient mix, read which tattoo removal machine treats multicolour tattoos safely and the colour tattoo removal results by ink colour before choosing a wavelength set.

Supply Format & Packaging

Supplied as a complete working set, minimum order one set. Carton size and gross weight below are the single-pack figures published for this configuration; the full accessory packing list is confirmed against your final configuration on the quotation.

Main unit
1 × Z150Pro console, aluminium body
Handpiece
1 × laser handpiece with coiled umbilical
Treatment probes
5 probes supplied as standard — 532 / 755 focus / 1064 / 1064 fractional / 1320 nm
Chassis finish
White or black, chosen at order
Single package
55 × 53 × 56 cm, 27.0 kg gross
Power
110–120 V / 220–240 V, plug to destination

The full accessory and setup detail is in the Z150Pro user manual (PDF).

Z150Pro picosecond laser tattoo removal machine in black chassis, three-quarter view with handpiece raised

Z150Pro is built on the same platform in both finishes — white and black are cosmetic variants of the same 4-wavelength console.

Pricing

Pricing is per set, in two quantity tiers, with minimum order one set. Prices exclude freight, insurance and import duty, which we quote against your destination port.

$1,250–1,300Per set, by order tier
1 setMinimum order quantity
15 daysMass production lead time
Item Detail
Price per set — 1 set $1,300
Price per set — 2 sets and above $1,250
Minimum order 1 set
Logo customisation Available — no surcharge on this configuration
Interface language OEM language pack available
Lead time Within 15 working days for mass production
Warranty 2 years
Freight and duty Excluded — quoted against your destination port

Per-set pricing for this configuration (October 2026). Final pricing depends on quantity, configuration and destination.

Request a Quote →

Get a Quote for Z150Pro

Tell us the quantity, the destination port and whether you need OEM language or logo — we will come back with pricing, freight and the full packing list for your configuration. Minimum order is one set.
Prefer to read first? Download the picosecond laser catalogue or the Z150Pro user manual.

Name *
Fill out this field
Email *
Please enter a valid email address.
Message *
Fill out this field
Country *
Fill out this field
Phone
Fill out this field
Whatsapp
Fill out this field

Frequently Asked Questions

What is the Z150Pro?
Z150Pro is a tabletop picosecond laser for tattoo removal, pigment correction and skin rejuvenation. It carries four wavelengths — 532 nm, 755 nm, 1064 nm and 1320 nm — runs up to 1500 W with 2000 mJ per pulse, and is controlled from an 11.6-inch 4K touchscreen.
Which wavelength does what?
532 nm handles red, orange and yellow ink and superficial pigment. 755 nm is the melanin-heavy band and is what clears blue and green ink. 1064 nm reaches deeper dermal pigment and black ink. 1320 nm is used for carbon laser peel and collagen-stimulating rejuvenation rather than pigment removal.
How powerful is it, and how fast are sessions?
Up to 1500 W and 2000 mJ per pulse, at a repetition rate of up to 10 Hz. A high pulse rate shortens chair time on dense work, because the operator covers an area with more pulses per minute.
How long does the laser source last?
The stated life is 5,000,000 shots. At typical clinic volumes this keeps the cost per treatment low over the life of the machine. Treatment probes, not the laser source, are the routine wear item — five are supplied as standard.
Is it too large for a small clinic?
No — it is a portable tabletop console, not a floor-standing system, so it fits a standard treatment room and can be moved between rooms. The single packed unit measures 55 × 53 × 56 cm and weighs 27.0 kg gross.
Can I have it in my own brand?
Yes. Z150Pro is supplied in white or black, and both the interface language and the machine logo can be customised for OEM and distributor programmes.
What is the minimum order and lead time?
Minimum order is one set, so you can evaluate a single machine before committing to volume. Mass production lead time is within 15 working days. Freight, insurance and import duty are quoted separately against your destination port.
What certification and warranty come with it?
This configuration carries CE and RoHS documentation, available for your import file, and a 2-year warranty. Ask us for the certificate pack for your destination market before you place the order.

Related Products & Reading

Pico vs Q-Switched Tattoo Removal

How picosecond and nanosecond platforms differ in practice — the comparison to read before you choose a wavelength set.

Read more →

Tattoo Removal Machine Guide

Q-switched, Nd:YAG and picosecond lasers explained, with the buying criteria that actually change clearance.

Read more →

Tattoo Removal Machine Cost 2026

What clinics actually pay for tattoo removal platforms, and where the four-wavelength machines sit in the market.

Read more →

Also consider the 980 nm vein removal laser and the 755 nm alexandrite hair removal platform if your equipment plan covers more than pigment and tattoo work.